Esdras Ngezahayo, Michael Burrow, Gurmel Ghataora

Abstract: Rainfall simulators have been used for erosion research for more than 50 years now. These are widely used in agricultural soils to assess the infiltration capacity and porosity of soils, and hence learn lessons on the potential of plant roots to penetrate those soils. Recently, rainfall simulators have been very useful to investigate soils detachment by both the raindrops kinetic energy and the subsequent flow shear stress. This has led to notable advances in the understanding of the failure of infrastructures such as unpaved roads due to surface soil loss and formation of erosion features, buried pipes and facilities due to removal of fill materials, as well as bridge scour and embankments failures to mention a few. To help conduct a thorough and rigorous research, rainfall simulators must produce raindrops of the same size as those produced by the natural rainfall. Calibrating rainfall simulators satisfying this key demand of raindrops sizes in the range of 1 mm to 6 mm posed challenges for years, and therefore led to inconsistencies in results from different studies. In this paper, an economical rainfall simulator which can be used for assessing erodibility of soils in unpaved roads was developed. The flour method technique was used to determine the sizes of the raindrops. The mean raindrops sizes were found to be 3.0 mm, 3.2 mm, and 3.5 mm, respectively for the rainfall intensities of 30 mm/hr, 51 mm/hr and 68 mm/hr falling through 2.0 m. In the same order of rainfall intensities, raindrops hit the surface of the tested surfaces by 193.5 µJ, 244 µJ and 301 µJ kinetic energies, which were sufficient to initiate detachment in soils of D50 ranging from about 0.4 mm to 1.5 mm compacted to maximum dry density.

Keywords: Rainfall simulator, flour method, drop size and energy, erosion, erodibility.

Date Published: August 4, 2021
DOI: 10.11159/ijci.2021.018

View Article